High-Shelf Equalizer Component

The High-Shelf Equalizer allows you to control the Gain of frequencies, as a group, above (higher than) an adjustable frequency. All the frequencies above the frequency you select, are adjusted to the same gain. You can also control the slope or transition to the high shelf. At the selected Frequency, the gain changes approximately +3dB or -3dB depending on wether the shelf is adding or reducing gain. Master controls allow you to Bypass, Invert, Mute, and control the Gain of the output of the equalizer.

Controls

Response

Control Name

Function

Range / Values

Response Panel

The Response panel provides vertical and horizontal cross-hairs with a dynamic frequency and level read-out. Place the mouse courser over the graph to activate the cross-hairs. When the Phase control is activated, the horizontal cross-hair line to the left of center represents the normal curve, the right side represents the phase curve. The readout is only for the normal curve.

X-Axis = 20Hz to 20kHz

Y-Axis Left = -24dB to 24dB

Y Axis Right = -180° to 180°

Phase

Turns the Phase curve display on and off.

Off/On

Master

Control Name

Function

Range / Values

Bypass

Bypasses the equalizer.

Off/On

Invert

Inverts the output signal.

Normal/Inverted

Mute

Mutes the output signal.

Off/On

Frequency

Control Name

Function

Range / Values

Frequency

(Hz)

Sets the frequency of the 3 dB point of the Filter Slope. The gain of frequencies from this point to the low end of the frequency range is controlled by the Gain knob.

Default = 1000

Range = 20 to 20000

Low Gain

(dB)

Controls the gain of the frequencies to the left of the selected frequency.

Default = 0

Range = 0 to 40

Properties

Property

Function

Value

Filter Slope

Sets the slope, or transition between to the high shelf. 6 dB per octave provides a slower transition, or softer slope, than 12 dB.

6 dB per Octave

12 dB per Octave

Type

Sets the type of input/output channels. Multi-Channel enables the Count Property.

Mono

Stereo

Multi-Channel

Count

Sets the number of input/output channels for Multi-Channel.

2 to 256

Enabled

Enables or disables the graphical Response graph.

Yes / No

Size

Sets the size of the graphical Response graph.

Small / Medium / Large

Control Pins

Pin Name

Value

String

Position

Pins Available

Bypass (Master)

0

1

active

bypass

0

1

Input / Output

Frequency

10 to 20000

10 Hz to 20 kHz

0.000 to 1.00

 

Gain

-20 to 20

-20 dB to 20 dB

0.000 to 1.00

Input / Output

Invert

0

1

normal

invert

0

1

Input / Output

Mute

0

1

unmute

mute

0

1

Input / Output

Related Topics Link IconRelated Topics


 

© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.

http://patents.qsc.com.